Product name: Disposable Hemostatic Clips
[Application]In medical institutions, this product is used in conjunction with endoscopes and high-frequency generators for the removal of polyps in the digestive tract.
detail picture
More secure with Window & hole design on clip,at the same time has multiple function that as a traction bracket
Clip length much shorter than other supplier's
Clip material NAS steel is imported from Japan
Reopening ability, before release, radiopaque, can be repeatedly opened and closed at least five times to facilitate placement in the appropriate position.
Integrated pre-assembled system, the product is ready to leave the factory, open the package can be applied, which is very beneficial for emergency hemostasis.
16mm wide claw distance is beneficial to grasp large pieces of tissue.
The ergonomic handle can intuitively perceive the opening and closing of the gripper. Once the gripper is closed, tactile feedback can be generated to indicate that it is ready to release.
Specification
| Part No. |
Opening(mm) |
Effective Length (cm) |
Coated Plastic |
Channel(mm) |
Handle Type |
| SD-02-230-11 |
11 |
230 |
YES |
2.8 |
Rotatable |
Soudon service
OEM:your company logo or name,color,detail specification of product
Quality: As long as there is damage due to non-human reasons, we provide free replacement
Support: We will try our best to provide the documents needed by suppliers to support the cooperation
Instructions
1. First check whether the aseptic packaging of the product is intact, then take out the clip device, gently tighten the sliding handle, and pull out the head protection cap of the clip device.
2. Slightly tighten the slide handle to ensure the clips are closed. Carefully insert the clip device through the biopsy channel of the endoscope, 2-3 cm at a time.
3. When the clip device protrudes 2-3 cm from the front end of the endoscope channel and reaches the expected position, open the clip of the clip device: gently move the sliding handle to the far end (away from the thumb ring) until it encounters greater resistance And pause, now the clip is in the open state;
4. The rotating wheel can be rotated during operation to adjust the angle between the clip of the clip device and the tissue to be clamped
5. If the clamping position is correct, it is necessary to close the clip of the clip device at the desired position to be clamped, and the sliding handle needs to be moved to the proximal end until a slight movement resistance is overcome on the handle. If the clamping position is not correct, the clips of the clip device can be pushed out again to open and reposition
6. After the clip mechanism is closed, continue to move the slide handle proximally until a high degree of resistance is felt or heard. Continue to move the slide handle proximally until the gripper and delivery sections separate
7. After separation, slowly pull out the delivery part of the clip device out of the endoscope channel. Dispose of the delivery part of the clip device according to the national or local medical waste disposal regulations for inspection.
Multi-view product:
MORE SIZE:
ABOUT SOUDON:
Zhejiang Shouding Medical Technology Co., Ltd. is an emerging brand company specializing in the R&D, production and sales of endoscopic minimally invasive interventional high-value medical devices. Established in December 2020, it is located in the world-famous beautiful West Lake - Hangzhou City.
The company covers an area of nearly 4,500 square meters, with standardized workshops, 100,000-level purification workshops and 10,000-level laboratories, equipped with advanced production and testing equipment.
What are your products' features? 1.Comply with more than 30 international standard qualification certifications, including FDA, CE, RoHS, SVHC, antimicrobial, flame retardant, high-temperature resistance, and antistatic.
2.Fastening, uniform, neat, brush filaments with high flexibility and strong bending, moderate and soft, durable. What is the advantage of your products and service? Stable quality, on-time delivery, competitive factory price, honest service. Can I get a sample before mass production? How long can I get sample product? Yes, We can provide you free sample to check the quality. Normally 2-3 days for stock samples. 7-10 days for customized samples. When we want to make our own logo, what kind of form is available for printing? Please send us vectorgraph including PDF, JPG, PSD, etc Resolution: no less than 1500dpi, and the higher, the better. What about the lead time for mass production? It depends on the order quantity, and the lead time of MOQ is about 7 to15 days. Do you have stock products to sell? Yes, we always a few regular and popular items in stock. Your sample orders are welcome. What is your terms of payment? We accept T/T,L/C, Paypal, Western Union etc. You can choose the one which is the most convenient or cost effective for you. More questions please feel free to contact us, we will reply you within 1 business day!
Audited Supplier 
){kind=link}