Product Description
Product name: Disposable Polypectomy Snares
[Structural Composition] Disposable polypectomy snare consists of shredded wire, adapter tube, pull cable, sheath tube, outer sheath tube, catheter, wheel, fixing tube, clamp block, electrode, sliding handle and handle.
1 Shredded 2 Adapter Tube 3 Cable 4 Sheath Tube 5 Outer Sheath Tube 6 Catheter 7 Wheel 8 Fixed Tube 9 Clamp Block 10 Electrode 11 Sliding Handle 12 Handle
There are Hexagon,Oval and Crescent types to choose from according to clinical requirement.
you also can choose the width according your need,such 10mm,25mm,30mm,35mm
Next,let's check the physical map
as shown in the figure, the product link is Hexagon type
[Application]In medical institutions, this product is used in conjunction with endoscopes and high-frequency generators for the removal of polyps in the digestive tract.
Product Parameters
| Part No. |
Sheath OD (mm) |
Effective Length (cm) |
Loop Width(mm) |
Shape |
| SD-03-M230-25B |
2.3 |
230 |
25 |
Hexagon |
Soudon Service
OEM:your company logo or name,color,detail specification of product
Quality: As long as there is damage due to non-human reasons, we provide free replacement
Support: We will try our best to provide the documents needed by suppliers to support the cooperation
Instructions
1. When removing a device from its packaging, unroll it and pay special attention to visually inspecting it for kinks, bends, or shattering. Do not use if abnormalities are found that may prevent its normal use.
2. Check the connecting wires, the cables must not have kinks, bends, broken or exposed wires, so that the power can be turned on normally, if there is any abnormality, the connecting wires should not be used.
3. Fully retract and extend the snare to verify that the product operates smoothly. Rotate the handle to confirm that the shreds can be turned flexibly.
4. In the case of turning off the power of high-frequency electrical equipment, perform a trial connection operation between the equipment and the device. Connect the connecting wire firmly to the electrode connection plug of the handle of the snare and the high-frequency electrical equipment. According to the requirements of the high-frequency electrical equipment manufacturer, place the patient return electrode and connect it to the high-frequency electrical equipment.
5. When the polyp is in the field of view of the endoscope, fully retract the snare into the sheath, and then slowly insert the sheath into the working channel of the endoscope until the front end of the snare protrudes out of the endoscope. WARNING: To ensure patient safety, power to high frequency electrical equipment should be disconnected until the snare is fully positioned around the polyp.
6. Push the snare slide handle until the snare shred is fully out of the sheath and place the shred around the polyp to be resected. In order to successfully capture polyps, the cutting plane should be perpendicular to the polyp pedicle. When not vertical, the handle can be rotated to adjust the angle of the snare plane until it is vertical. WARNING: To ensure patient safety, power to the HF generator device should be disconnected until the snare is fully positioned around the polyp.
7. Follow the manufacturer's instructions for the high-frequency electric generator equipment, turn on the power, and verify the desired setting parameters.
8. Perform a polypectomy to cut the polyp.
9. After the polypectomy is completed, turn off the power of the high-frequency electric generator. Insert the snare into the sheath and withdraw it from the endoscope.
10. Collect polyps, prepare or dispose of samples according to the treatment methods of the hospital where you are located.
11. After the operation is completed, pull out the connection wire from the snare electrode connection plug, and dispose of this product according to the guidelines of the hospital's biohazardous medical waste.
12. Disconnect the connecting wire from the high-frequency electrical equipment, and wipe off all foreign objects on the connecting wire with a damp cloth. Store loosely coiled.
Detailed Photos
ABOUT SOUDON:
Zhejiang Shouding Medical Technology Co., Ltd. is an emerging brand company specializing in the R&D, production and sales of endoscopic minimally invasive interventional high-value medical devices. Established in December 2020, it is located in the world-famous beautiful West Lake - Hangzhou City.
The company covers an area of nearly 4,500 square meters, with standardized workshops, 100,000-level purification workshops and 10,000-level laboratories, equipped with advanced production and testing equipment.
Audited Supplier 
){kind=link}