Rotatable Hemoclip Disposable ESD Endoscopic Hemostatic Clips with Ergonomic Handle with CE FDA Mdsap

Product Description

Product name: Disposable Hemostatic Clips


*** In medical institutions, this product is used in conjunction with endoscopes and high-frequency generators for the removal of polyps in the digestive tract.
 
 

*More secure with Window & hole design on clip,at the same time has multiple function that as a traction bracket

*Clip length much shorter than other supplier's
Clip material NAS steel is imported from Japan

*Reopening ability, before release, radiopaque, can be repeatedly opened and closed at least five times to facilitate placement in the appropriate position.

 

*Integrated pre-assembled system, the product is ready to leave the factory, open the package can be applied, which is very beneficial for emergency hemostasis.

*16mm wide claw distance is beneficial to grasp large pieces of tissue.

*The ergonomic handle can intuitively perceive the opening and closing of the gripper. Once the gripper is closed, tactile feedback can be generated to indicate that it is ready to release.

 

 

 

 

Specification:

Part   No.	Opening(mm)	Effective Length (cm)	Coated Plastic	Channel(mm)	Handle Type
SD-02-165-13C	13	165	YES	2.8	Rotatable

Instructions
1. First check whether the aseptic packaging of the product is intact, then take out the clip device, gently tighten the sliding handle, and pull out the head protection cap of the clip device.
2. Slightly tighten the slide handle to ensure the clips are closed. Carefully insert the clip device through the biopsy channel of the endoscope, 2-3 cm at a time.
3. When the clip device protrudes 2-3 cm from the front end of the endoscope channel and reaches the expected position, open the clip of the clip device: gently move the sliding handle to the far end (away from the thumb ring) until it encounters greater resistance And pause, now the clip is in the open state;
4. The rotating wheel can be rotated during operation to adjust the angle between the clip of the clip device and the tissue to be clamped
5. If the clamping position is correct, it is necessary to close the clip of the clip device at the desired position to be clamped, and the sliding handle needs to be moved to the proximal end until a slight movement resistance is overcome on the handle. If the clamping position is not correct, the clips of the clip device can be pushed out again to open and reposition
6. After the clip mechanism is closed, continue to move the slide handle proximally until a high degree of resistance is felt or heard. Continue to move the slide handle proximally until the gripper and delivery sections separate
7. After separation, slowly pull out the delivery part of the clip device out of the endoscope channel. Dispose of the delivery part of the clip device according to the national or local medical waste disposal regulations for inspection.



More images of product:

 

 




More sizes/ specifications:




Other ESD products:
(Just click below)







ABOUT US:

Zhejiang Soudon Medical Technology Co., Ltd. is an emerging brand company specializing in the research and development, production and sales of high-value medical devices for minimally invasive and interventional endoscopic surgery. As a professional manufacturer of endoscopic accessories such as disposable biopsy forceps, disposable injection needles, disposable snares, disposable hemostatic clips and disposable retrieval basket etc which are widely used in ERCP, ESD, EMR.

Our company has a number of senior and professional technical research and development talents, a number of independent intellectual property rights and patents, and has established strategic partnerships with many colleges and universities in Hangzhou, Shanghai and other cities.

FAQ:

Q: Are you factory or trading company?
A: We are a professional manufacturer who has rich experience in R&D, manufacture and sales of series endoscopic accessories like Disposable Stone Retrieval Balloon Catheter, Disposable Hemostatic Clips, ESD Knife etc.

Q: Can we have a sample for testing?
For some existing samples, we can provide for free. Please kindly contact us, we can negociate.

Q: Can you offer customized service?
Yes, both OEM and ODM are available. Let me know your idea or requirements on the products, we will make it perfect for you.

Q: How long is your delivery time?
Generally 15-25 days for mass production after sample confirmed and the receipt of formal PO or deposit.

Q: How does your factory do regarding quality control?
A: "Quality is priority." We always attach great importance to quality controlling from the beginning to the end. Our factory has gained CE, ISO13485, CFDA, SGS certificates.