Product name: Disposable Endoscope Injection Needles
*** Used in conjunction with an endoscope, it is suitable for submucosal injection in the digestive tract.
PP material outer tube with better support performance,blood return can be observed,careful and slow release needle
The needle tip not rebound during injection as stable needle seat
Specification
| Part No. |
Catheter OD (mm) |
Effective Length (cm) |
Model Needle(G) |
Needle Extension Length(mm) |
Metel End Cap |
| SD-04-A2323-6 |
2.3 |
230 |
23 |
6 |
TYPE A Without metal end cap |
Soudon service
OEM:your company logo or name,color,detail specification of product
Quality: As long as there is damage due to non-human reasons, we provide free replacement
Support: We will try our best to provide the documents needed by suppliers to support the cooperation
Instructions
1. Preparation
1 Sterile packaging inspection: Check whether the aseptic packaging is broken, not tightly sealed or soaked in water, etc.
2 Appearance inspection: Take out the product from the package, check whether the outer tube and inner tube are bent, kinked, damaged, etc., and check whether the parts of the product are falling off, loose, damaged, etc.
3 Operation inspection: unfold and straighten the outer tube, imitate the action of use, push the sliding handle to confirm that the needle can be extended; pull back the sliding handle to confirm that the needle can be retracted.
4 Injection inspection: connect the syringe that has been filled with the liquid medicine with the sliding handle, push the syringe until the liquid medicine flows out from the needle tip, and confirm that the liquid medicine does not leak from places other than the needle tip.
2. Insert the endoscope
5 Referring to step 3, pull back the sliding handle to retract the needle tip. Insert the outer tube into the forceps hole of the endoscope, and slowly push the outer tube until the tip of the outer tube enters the field of view of the endoscope.
6 Select a suitable injection site through the endoscope, and keep the lens position.
3. Puncture tissue and inject liquid medicine
7Push the sliding handle to confirm that the needle protrudes from the front end of the outer tube.
8 Insert the needle into the target tissue, and push the plunger of the injector to inject liquid.
9 After completing the injection, pull back the outer tube to withdraw the needle from the injection site.
Remarks: Repeat the above (6-8) steps for multiple injections as needed.
4. Withdraw the injection needle
10 After completing the procedure, pull back the sliding handle to the end, retract the needle into the outer sheath, and remove the product from the endoscope.
11 Dispose of this product in accordance with the institution's biohazardous medical waste management regulations.
Multi-view product:
More size :
Other ESD products:
(Just click below)
Polypectomy Snares
Hemoclips
ESD Knife
ABOUT US:
Zhejiang Soudon Medical Technology Co., Ltd. is an emerging brand company specializing in the research and development, production and sales of high-value medical devices for minimally invasive and interventional endoscopic surgery. As a professional manufacturer of endoscopic accessories such as disposable biopsy forceps, disposable injection needles, disposable snares, disposable hemostatic clips and disposable retrieval basket etc which are widely used in ERCP, ESD, EMR.
Our company has a number of senior and professional technical research and development talents, a number of independent intellectual property rights and patents, and has established strategic partnerships with many colleges and universities in Hangzhou, Shanghai and other cities.
FAQ:
Q: Are you factory or trading company?
A: We are a professional manufacturer who has rich experience in R&D, manufacture and sales of series endoscopic accessories like Disposable Stone Retrieval Balloon Catheter, Disposable Hemostatic Clips, ESD Knife etc.
Q: Can we have a sample for testing?
For some existing samples, we can provide for free. Please kindly contact us, we can negociate.
Q: Can you offer customized service?
Yes, both OEM and ODM are available. Let me know your idea or requirements on the products, we will make it perfect for you.
Q: How long is your delivery time?
Generally 15-25 days for mass production after sample confirmed and the receipt of formal PO or deposit.
Q: How does your factory do regarding quality control?
A: "Quality is priority." We always attach great importance to quality controlling from the beginning to the end. Our factory has gained CE, ISO13485, CFDA, SGS certificates.
Audited Supplier 
){kind=link}